產品介紹

  • tx
  • tx
  • tx
  • tx
  • modern_hover
  • mx

  • gama

  • tpu

  • konica

  • 3m

  • 3m

GAMA冰盾外貼隔熱盾甲


冰盾超跑外貼膜S6說明


全球產品諮詢預約客服專員:https://lin.ee/aoNxmIv
GAMA冰盾外貼膜S6是具有隔熱及防爆玻璃的外貼防護罩,它具有吸收極高的衝擊力特性,可以有效阻止在高速行駛下石子鈍器飛濺而引起的擋風玻璃破裂,提高車内人員的行駛安全!
GAMA冰盾外貼膜S6的表面硬塗層具有超强的防刮性能,能夠有效降低雨刷等物體對它磨損傷害,同時防止路邊危險物品衝擊造成的刮傷! 特別說明此產品屬於消耗產品,表面防刮效果會隨使用方式、雨刷使用、化學藥劑沾黏及天候狀況自然衰退。
建議可搭配使用GAMA翠光防護乳保養延長冰盾外貼膜的產品使用壽命。
GAMA冰盾外貼防爆膜非防彈膜,因此不保證車輛在跟車、競速、賽道、超車等情況下完全不會有任何破損。
產品定價: NT 2萬元整
GAMA冰盾超跑玻璃盾甲數據
產品型號: 冰盾 S6
整支規格: 1.22m x 30m
單車規格: 1.22m x 1.6m
產品材質:柔性耐候PET
產品施工: 四向收縮
產品厚度: 6MIL
塗層硬度: 7H
產品隔熱: 95%
產品透光: 75%
隔熱效果: 熱焦耳BTU從2197降到35.6

產品特色


衝擊防護:有效抵抗外力衝擊
視野清晰:炫光降低率高達5%
鍍膜效果:表面有鍍膜級撥水效果
提升耐用:抗斷裂強度100pounds/inch

耐磨說明

: -)使用1cm小碎石進行模擬測試將冰盾貼在玻璃上並垂直固定,距離40cm的距離下使用壓縮空氣衝擊,衝擊質量為100公克、直徑為3.2至4.8mm的撞擊下,在玻璃冰盾的保護下玻璃表面幾乎毫無損傷!
-)本產品冰盾保護膜經過水與沙的混合狀態下進行10000次的往返測試無嚴重刮痕現象。

Feature of Product: Impact protection: Effective resistance to external impact Clear vision: Glare reduction rate up to 5% Coating effect: Coating-level water repellent effect on the surface improved Durability: Breaking strength 100 Pounds/Inch

r-resistant Description: -) Use 1cm small gravel to carry out a simulation test and fix the TPU on the glass vertically. At a distance of 40cm, use compressed air to impact. The impact mass is 100 grams and the diameter is 3.2 to 4.8mm. Under the impact, under the protection of TPU glass There is almost no damage to the lower glass surface! -) The TPU protective film of this product has undergone 10,000 round-trip tests under the mixed state of water and sand without serious scratches.

GAMA冰盾天窗隔熱外貼膜說明


產品材質:TPU材質
產品規格:1..52米*15米
產品顏色:淺藍/淺黑
產品厚度: 7MIL
產品性能:紅外線99 % 紫外線99% 透視率75%
產品功能:高隔熱 超強防爆 超強抗腐 超強抗黃變持久耐用 雙塗層 熱修復 增亮 抗污 抗寒

產品特色

衝擊防護:有效抵抗外力衝擊
視野清晰:炫光降低率高達5%

鍍膜效果:表面有鍍膜級撥水效果
提升耐用:抗斷裂強度100pounds/inch

耐磨說明

-)使用1cm小碎石進行模擬測試將冰盾貼在玻璃上並垂直固定,距離40cm的距離下使用壓縮空氣衝擊,衝擊質量為100公克、直徑為3.2至4.8mm的撞擊下,在玻璃冰盾的保護下玻璃表面幾乎毫無損傷!
-)本產品冰盾保護膜經過水與沙的混合狀態下進行10000次的往返測試無嚴重刮痕現象.

Feature of Product

TPU-S7
1. High abrasion and impact resistance Impact protectionv
2. Cold resistance: withstand low temperature under -35℃
3. High temperature resistance: withstand high temperature above 120 ℃
4. Mechanical properties well: good bearing capacity and impact resistance
5. Oil resistance, water resistance, special depending on the type of TPU
6. Oxidation resistance well, super explosion-proof, super anti-corrosion, super anti-yellowing
7. High workability: can be processed by common processing methods
8. Wide range of hardness: increasing hardness still has good elasticity and toughness

Wear-resistant Description

-) Use 1cm small gravel to carry out a simulation test and fix the TPU on the glass vertically. At a distance of 40cm, use compressed air to impact. The impact mass is 100 grams and the diameter is 3.2 to 4.8mm. Under the impact, under the protection of TPU glass There is almost no damage to the lower glass surface!
-) The TPU protective film of this product has undergone 10,000 round-trip tests under the mixed state of water and sand without serious scratches. -) Thermal Effects: Thermal Joule BTU reduced from 2197 to 35.6

Copyright © 2015 台南大世界隔熱紙 All rights reserved. (建議瀏覽器IE9以上版本或建議使用Chrome瀏覽器)